DeWalt DCF500N-XJ 12V XR 3/8″ Ratchet (Body Only)
DeWalt DCF500: 3/8" cordless ratchet, 67.79 Nm motor torque, up to 450 rpm, 0.88kg bare. 3/8" and 1/4" square anvils and a 1/4" hex anvil (swappable).
Where it sits among 3/8" ratchets
Scaled against the 15 ratchets with a 3/8" drive we list, so other sizes aren't in the mix. Not a score: bigger isn't always better for your job.
Full specs
From DeWalt's own documentation. Checked 17/10/2026. Report a spec error ›
Drive & Torque
Physical & Build
Powered by DeWalt 12V XR · 3
All 3 batteries that fit this tool, smallest first. Kits and chargers ›
Tool weight worked out by adding each pack's weight to the bare tool, using the makers' figures. The maker's own with-battery figure can differ slightly. We may earn a commission on retailer links.
Warranty · 3yr
Register within 4 weeks. Batteries/chargers excluded (PowerStack eligible). Nailers and other fastening tools are excluded and keep 1 year. Kit tools registered individually.
Warranty terms are set by the maker and can change. Always confirm current cover on their site before you buy.
Related guides
Buying GuidesBuying a Spare Power Tool Battery
A spare battery is the most common thing anyone buys after the tool itself, and it is the easiest one to get…
Read guide ›
Getting StartedImpact Driver vs Combi Drill: Which Do You Actually Need?
They look similar, they cost about the same, and most people buy them as a twin kit without ever being told what…
Read guide ›
Getting StartedFirst and Second Fix Carpentry Explained
"First fix" and "second fix" get said on every site, and nobody stops to explain them, which leaves anyone starting out nodding…
Read guide ›
