GKT 55 GCE Plunge Saw

No retailer price yet

Ways to buy ›

‹ Plunge Saws

GKT 55 GCE 110V plunge saw No product photo yet

Compare it with

vsDeWalt DWS520

vsMakita SP6000

vsHiKOKI C3606DPA

vsEinhell TP-PS 18/165 Li BL

PowerMains, 110V

Warranty3 years (with registration)The terms ›

SpecsFrom Bosch's own documentationChecked 13 Jun 2026

Plunge Saws

Bosch GKT 55 GCE Professional 110V 1400W 165mm Corded Plunge Saw (L-BOXX)

4.7kg110V3 years (with registration)

Bosch GKT 55 GCE Professional. Corded 110V 165mm plunge saw for site transformers. 57mm cut depth at 90°, 42mm at 45°. -1° to 47° bevel. 35mm Click & Clean dust port. Runs on Bosch FSN rail (Mafell rails also fit). 4.7kg. Mains tool.

Adds it to My Tools, kept on this device

Lowest price we track

No retailer price yet

None of the retailers we track lists it right now.

165mm

Blade

57mm

Cut depth (90°)

6,250rpm

Max speed

4.7kg

Weight

Where it sits among 165mm plunge saws

Scaled against the 14 plunge saws with a 165mm blade we list, so other sizes aren't in the mix. Not a score: bigger isn't always better for your job.

Cut depth at 90°, off the rail57mm

56mm lowestEinhell TE-PS 165highest 66mmHiKOKI C3606DPA

Cut depth at 45°, off the rail42mm

40mm lowestMakita SP6000highest 44mmMilwaukee M18 FPS55

Max bevel angle47°

45° lowestEinhell TE-PS 165highest 48°Milwaukee M18 FPS55

Weight4.7kg

3.7kg lightestMakita SP001Gheaviest 5.1kgDeWalt DWS520

Compare it with: + DeWalt DWS520 + Makita SP6000 + HiKOKI C3606DPA + Einhell TP-PS 18/165 Li BL

Full specs

From Bosch's own documentation. Checked 13/06/2026. Report a spec error ›

Cutting

Saw typePlunge

Blade diameter165 mm

Blade bore20 mm

Max depth (90°), off rail57 mm

Max depth on rail51 mm

Max depth (45°), off rail42 mm

Bevel range-1° to 47°

Blade included✓ Yes

Power & Motor

Voltage110V

Power input1,400 W

No-load speed6,250 rpm

Dust & Rail

Dust port sizeClick & Clean

Extractor hose✓ Fits Bosch Click & Clean extractor hoses directly (1 extractor listed)

Compatible railsBosch FSN, Mafell guide rail

Extractor auto-startYes, plugged into an auto-start extractor

Physical & Build

Weight4.7 kg

Case typeL-BOXX

Case included✓ Yes

Noise level92 dB(A) LpA / 103 dB(A) LwA

Vibration≤2.5 m/s²

The verdictOur take

This is the 110V site version of the GKT 55 GCE, with the same 92 dB(A) running, 2.5 m/s² or below smoothness and 57mm depth (51mm on rail). On rails it is unusually flexible: the Bosch FSN rail pairs with Mafell, and the saw's dual-groove base also drops onto Festool and Makita rails. We rate it a strong, quiet corded saw for 110V sites; the Makita SP6000J is the closest corded alternative.