DCD444 Angle Drill

£464.95at Tooled Up · + £5.95 delivery · Available to order

View at Tooled Up › We may earn a commission

‹ Angle Drills

18V XR · Brushless DeWalt DCD444N-XJ 18V XR Brushless Stud & Joist Angle Drill (Body Only)

Angle Drills · DeWalt 18V XR

DeWalt DCD444N-XJ 18V XR Brushless Stud & Joist Angle Drill (Body Only)

Name: DeWalt DCD444N-XJ 18V XR Brushless Stud & Joist Angle Drill (Body Only)
Brand: DeWalt
SKU: DCD444N-XJ
Availability: BackOrder

220Nm1-speed4.1kg bare3 years (with registration)

DeWalt DCD444 18V XR brushless stud & joist angle drill: 220Nm, E-Clutch, self-feed bits to 65mm, hole saws to 102mm. Body only.

Adds it to My Tools, kept on this device

Lowest price we track

£464.95at Tooled Up · + £5.95 delivery · Available to order

View at Tooled Up ›

Compare retailersTotal with delivery

Tooled Up Lowest£464.95 + £5.95 delivery · Available to order£470.90View ›

My Tool Shed£464.95 + £5.95 delivery · Available to order£470.90View ›

Prices from UK retailer feeds, updated daily.We may earn a commission

220Nm

Max torque

65mm

Self-feed bit

4.1kg

Weight (bare)

Where it sits among stud & joist angle drills

Scaled against the 11 angle drills (stud & joist) we list, so other sizes aren't in the mix. Not a score: bigger isn't always better for your job.

Max torque220Nm

30Nm lowestMilwaukee M18 CRAD2highest 269NmDeWalt DCD470

Max self-feed bit65mm

65mm lowestThis onehighest 118mmMakita DA4000LR

Weight (bare)4.1kg

2.9kg lightestMakita DDA450heaviest 7kgDeWalt DCD470

Max hole saw102mm

101.6mm lowestMilwaukee M18 CRAD2highest 159mmMilwaukee M18 FRAD2

Compare it with: + Makita DDA450 + Bosch GRD 18V-127 + Milwaukee M18 FRAD2 + HiKOKI DN18DSL

Full specs

From DeWalt's own documentation. Checked 27/09/2026. Report a spec error ›

Performance

TypeStud & joist

Max torque220 Nm

Speed settings1

No-load speed0–1,250 rpm

Kickback control✓ Yes

Kickback systemE-Clutch

MotorBrushless

Voltage18V

What It Can Bore

Max self-feed bit65 mm

Max hole saw102 mm

Chuck size13mm

Chuck typeKeyed Metal

Physical & Build

Weight (bare)4.1 kg

Weight (with battery)4.71 kg

LED work light✓ Yes

The verdictOur take

The DeWalt DCD444 is an 18V XR brushless stud & joist angle drill, with 220Nm, a single speed of 1,250rpm and a 13mm keyed metal chuck, at 4.1kg bare. It takes self-feed bits to 65mm and hole saws to 102mm, and has E-Clutch anti-kickback protection. We rate it a strong 18V choice for plumbers and electricians; for bigger hole saws the FlexVolt DCD470 goes to 150mm, and Bosch's GRD 18V-127 is lighter at 3.1kg with its own kickback control.

Powered by DeWalt 18V XR · 12

All 12 batteries that fit this tool, smallest first. Kits and chargers ›

DCBP034 1.7Ah · 30.6Wh 0.32kg 4.42kg from £78.95at Tooled Up + £5.95 delivery View at Tooled Up ›

DCB183 2.0Ah · 36Wh 0.4kg 4.5kg from £44.95at Tooled Up + £5.95 delivery View at Tooled Up ›

DCBP318 3.5Ah · 63Wh 0.58kg 4.68kg from £99.95at Tooled Up + £5.95 delivery View at Tooled Up ›

DCB182 4.0Ah · 72Wh 0.61kg 4.71kg from £49.95at Tooled Up + £5.95 delivery View at Tooled Up ›

DCB184 5.0Ah · 90Wh 0.62kg 4.72kg from £59.95at Tooled Up + £5.95 delivery View at Tooled Up ›

DCB184B 5.0Ah · 90Wh 0.62kg 4.72kg No retailer price yet About this battery ›

DCBP518 5.0Ah · 90Wh 0.75kg 4.85kg from £122.95at Tooled Up + £5.95 delivery View at Tooled Up ›

DCB546 6.0Ah · 108Wh · via DeWalt 18V/54V FlexVolt 1.08kg 5.18kg from £99.95at Tooled Up + £5.95 delivery View at Tooled Up ›

Tool weight worked out by adding each pack's weight to the bare tool, using the makers' figures. The maker's own with-battery figure can differ slightly. We may earn a commission on retailer links.

Warranty · 3yr

Up to 3 years1 year as standard, 3 once you register it with DeWalt

Register within 4 weeks. Batteries/chargers excluded (PowerStack eligible). Nailers and other fastening tools are excluded and keep 1 year. Kit tools registered individually.

Warranty terms are set by the maker and can change. Always confirm current cover on their site before you buy.